PrintDry - Vaccum Sealed Filament Container - Package of 5

PrintDry

  • $99.95
    Unit price per 

Shipping calculated at checkout.


Description: 

Prevent moisture from saturating filament by storing it in vacuum-sealed containers. A special valve and pump are used to suck the air out of the container, creating a vacuum seal that prevents moisture in the air from getting into the container. When completely sealed, the center of the vacuum valve will collapse inward from its original dome shape. By keeping them stored in the vacuum-sealed container it will ensure longer shelf life.

Place your filament spool inside the container with some desiccant pouches, put on the lid, and align the tabs of the lid and the container, engage the 4 strong clamps.

Take the hand plunger and line up the bottom of the hand plunger with the center vacuum valve on the container lid.  Pressing down gently on the hand plunger, simply lift the plunger handle slowly until it reaches the top of the pump, and then push down on the plunger until it reaches the bottom of the pump. Repeat this up and down motion anywhere from 4-8 times.

To release the vacuum seal, place your index finger on the outside rim of the valve, and press it towards the center.

Package Includes:

  • 5 Vacuum sealed filament containers
  • 1 Vacuum pump
  • Filament spool not included

Technical Specification:

  • Container Size: 265mm Outside Diameter x 115mm Height / 10.5" Outside Diameter x 4.5" Height
  • Filament Max Spool Size: 205mm Outside Diameter x 85mm Height / 8" Outside Diameter x 3.3" Height