Yidimu 4K Resin - Yellow


  • $59.99
    Unit price per 

Shipping calculated at checkout.

Yidimu 4K Monochrome LCD Resin Now In Stock! 


Produce stunning models with Yidimu 4K monochrome LCD resin. This resin is recommended for all Yidimu 4K monochrome LCD printers. Don't sacrifice printing quality or reliability, for best results, purchase your Yidimu 4K resin today.



Recommended Printing Parameters:

  • Layer Thickness (mm): 0.05
  • Normal Exposure Time (s): 1.5-2
  • Bottom Exposure Time (s): 50-60
  • Volume: 1KG Container
  • Way to Clean: Clean with alcohol, spray with an air gun
  • Suitable For: 4K Monochrome LCD Printers
  • Application: General modeling and prototyping

Operating Instructions:

It is recommended that you use your resin and 3D printers indoors under well-ventilated conditions. Avoid exposure to sunlight and indoor luminescence. Please keep resin out of reach from children. Do not dump resin. Please cure resin and treat/recycle it as general plastic garbage. 


Do not eat or swallow the resin. Wear goggles to avoid eye contact with resin. If you have eye contact with resin, wash your eyes with water immediately and thoroughly. The resin might cause slight irritation to the skin. Wear gloves when handling resin. Stop using if you suffer an allergic reaction. The resin will have a slight odor. It is strongly recommended that you use it under ventilated conditions. 

Recommended Safety Equipment:

  • Gloves
  • Mask
  • Goggles
  • Lab Coat